Mocomtech CDM-QX - Manual (Page 101)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Front Panel Operation MN/CDMQX.IOM
5–35
5.4.6.4 CONFIG: Interface
Æ QDI
QDI Tributary Ports
1 2 3 4 (◄ ►,ENT)
Select 1, 2, 3, or 4 using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: Interface
Æ QDI Æ 1, 2, 3, or 4
Port#X: Drop Insert LineCode
Alarm (◄ ► ENT)
Where X is the selected tributary port number for this menu and all submenus that follow: Select
Drop, Insert, LineCode, or Alarm using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: Interface
Æ QDI Æ 1, 2, 3, or 4 Æ Drop
Port#X Tx Trib Rate:(▲ ▼ ENT)
Disabled (00x64kbps)
Set the desired Drop / Tx Tributary data rate by using the ST arrow keys. Press
ENTER
when done. Note that this example depicts the Nx64kbps data rate where N=0 (Disabled).
The next example depicts the Nx64kbps data rate where N=24:
Port#X Tx Trib Rate:(▲ ▼ ENT)
01536.000kbps (24x64kbps)
To continue, the next example depicts the Nx64kbps data rate where N=32 (Full E1) is
specified:
Port#X Tx Trib Rate:(▲ ▼ ENT)
Full E1 (32x64kbps)
When N=32 (Full E1) is selected, pressing
ENTER
takes the user back to the QDI parent
menu. Otherwise, the following submenu displays (where X is the selected tributary port
number):
PX D-CH: 1 2 3 4 5 6 ►
TS: 11 02 06 04 05 03
When X displays, as per this example, this means that there are more channels available
beyond Channel 6. Use right arrow key X to view more, making sure that
ENTER
is
pressed once the selection is made.
CONFIG: Interface Æ QDI Æ 1, 2, 3, or 4 Æ Insert
Port#X Rx Trib Rate:(▲ ▼ ENT)
01536.000kbps (24x64kbps)
Similar to the Drop side, set the desired Insert / Rx Tributary Data Rate by using the ST
arrow keys. Press
ENTER
when done. Note that this example depicts the Nx64kbps data
rate where N=24. Once a data rate has been set, the following submenu displays (where X
is the selected tributary port number):
PX I-CH: 1 2 3 4 5 6 ►
TS: 11 02 06 04 05 03