Mocomtech CDM-QX - Manual (Page 69)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Front Panel Operation MN/CDMQX.IOM
5–3
5.1.3 Keypad
IMPORTANT
The keypad has an auto-repeat feature. If a key is held down for more than 1 second,
the key action will repeat, automatically, at the rate of 15 keystrokes per second. This is
particularly useful when editing numeric fields, with many digits, such as frequency or
data rate.
The keypad, in its original and current incarnations, is shown in Figure 5-2:
Diamond Keypad (used prior to June 2007) Button Keypad (used as of June 2007)
Figure 5-2. CDM-Qx/QxL Keypad
The function of the keypad is as follows:
ENTER
[ENT]
This key is used to select a displayed function or to execute a modem
configuration change.
CLEAR
[CLR]
This key is used to back out of a selection or to cancel a configuration change
that has not been executed using ENTER [ENT]. Pressing CLEAR [CLR]
generally returns the display to the previous selection.
◄ ►
[
←] , [→]
(Left, Right)
These arrows are used to move to the next selection or to move the cursor
position. Most of the menus (space permitting) include arrow key hints to guide
the user.
▲ ▼
[
↑] , [↓]
(Up, Down)
These arrows are used primarily to change configuration data (numbers), at the
current cursor position. Occasionally they may be used to scroll through a
number of choices at the current cursor position. Most of the menus (space
permitting) include arrow key hints to guide the user.