Inter-Tel Axxess - Manual (Page 94)

Page 78
System Hardware
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
Inter-Tel Phones
Six-Line Liquid Crystal Display (LCD)
All Model 8560, Executive, and Professional Display Phones have a six-line LCD. Each line
has 16 characters. (A picture of the Model 8560 display is shown in the Figure below. A pic-
ture of the Executive display is shown on the following page.) The top two lines are for stan-
dard call information and show the same displays as other display phones. The remaining four
lines are used for displaying feature-related menus that change with the function being per-
formed by the phone (intercom call, outside call, programming, etc.). These lines have menu
selection buttons on both sides (eight buttons) that are used for menu features. When there are
two prompts on a line, like PREVIOUS and NEXT, the button next to the word is the one that
will select that feature. When there is only one prompt on a line, like DO NOT DISTURB,
then pressing the button on either side of the prompt will select it.
NOTE: Version 7.0 or later system software is required to support the menu display and but-
tons on the Model 8560.
There is a system-wide flag, called “Alter-
nate Keyset Menu Displays,” that deter-
min es the d ispl ay that Model 8560,
Executive, and Professional Phone users
will see during an outside call. In the
default state, the display shows the follow-
ing menu with Transfer-To-Hold on the first
menu and Flash on the “More...” menu:
If the Alternate Keyset Menu Displays flag
is enabled, the Model 8560, Executive, and
Professional Phone users will see the fol-
lowing menu with Flash on the first menu
and Transfer-To-Hold on the “More...”
menu:
Enabling the Alternate Keyset Menu flag allows Centrex features to be accessed more easily,
using the FLASH menu option.
FIGURE 6. Model 8560 Phone Displays
HOLD
TRANSFER
TRANSFER-TO-HOLD
MUTE SYS HOLD
CNF
MORE...
HOLD
TRANSFER
FLASH
MUTE SYS HOLD
CNF
MORE...
LCD WITH SIX 16-CHARACTER LINES 8 LCD MENU SELECTION KEYS