Viewing system speed-dial numbers, Dialing system speed-dial numbers – Inter-Tel Axxess User Manual
Page 247
Page 231
System Features
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Viewing System Speed-Dial Numbers
Viewing System Speed-Dial Numbers
T
O
VIEW
SYSTEM
SPEED
-
DIAL
NUMBERS
AND
NAMES
:
NOTE:
If you make a mistake, use the
button to backspace.
1.
While on hook, press
or enter the System-Speed Dial feature code (381). The
display shows REVIEW SYS SPEED # (000-999).
2.
Enter the desired location code (000-999) or press the SEARCH menu button. The dis-
play shows the programmed name and number.
3.
If desired, scroll forward through the speed-dial locations in alphabetical order by press-
ing the high end of the Volume button or the NEXT button, or scroll backward by press-
ing the low end of the Volume button or the PREVIOUS button.
4.
Repeat steps 2 and 3 for each speed-dial location to be viewed. Or, press
or CAN-
CEL to terminate this feature.
5.
To automatically select a trunk and dial the displayed number, press .
Dialing System Speed-Dial Numbers
T
O
DIAL
SYSTEM
SPEED
-
DIAL
NUMBERS
AT
AN
I
NTER
-T
EL
PHONE
:
1.
If desired, lift the handset and select an outgoing trunk. (You may skip this step.)
2.
Press
or enter the System Speed-Dial feature code (381). The display shows
REVIEW SYS SPEED # (000-999). Non-display phone users hear a confirmation tone.
3.
Enter the location code (000-999) for the desired number. If you have not selected a
trunk, press
or
the
ACCEPT menu button to accept the number and automatically
select a trunk. Or, press the ARS button, a trunk button, a trunk group button, or the
button to select a trunk. The number is automatically dialed. (Display
phones show the number dialed unless it is a non-display number.) If you hear reorder
tones, your station is restricted from dialing the selected number. If the display shows
INVALID BIN NUMBER, you entered an invalid speed-dial location code.
T
O
DIAL
SYSTEM
SPEED
-
DIAL
NUMBERS
AT
A
SINGLE
-
LINE
SET
:
1.
Lift the handset and select an outgoing trunk.
2.
Hookflash and enter the System Speed-Dial feature code (381). You hear a confirmation
tone.
3.
Enter the location code (000-999) for the desired number. The number is automatically
dialed. If you hear reorder tones, your station is restricted from dialing the selected
number.
MUTE
SYS SPDL
#
SYS SPDL
#
OUTGOING