Inter-Tel Axxess User Manual

Page 38

Page 22

Administrator Procedures

AXXESS

ADMINISTRATOR’S GUIDE – January 2004

System Programming

2. The display shows SWAP (extension) WITH EXTENSION. Enter the second

extension number to be swapped using the same methods previously
described. The display shows DATABASE UPDATED.

NOTE:

If you cancel or terminate the feature without entering the second extension

number, the system discards any changes that have not yet been saved, and the
display shows NO UPDATE PERFORMED. If the entered extension is the adminis-
trator station performing the swap, the same extension number as the target station,
or the wrong device type, the display shows CONFLICTING EXTENSION.

When the display shows ENTER SYSTEM OPTION, press

again to exit to the

ENTER DATABASE OPTION prompt.

When finished with all programming, press

while the ENTER DATABASE

OPTION prompt is displayed. This ends the programming session.

If a system reset is required, the display shows ENTER SYS RESET OPTION. Do one
of the following:

— Delayed Reset: Press

the

DELAYED menu button to delay the reset. The

display shows DELAYED RESET SCHEDULED. The system will be reset at the
pre-programmed time.

— Immediate Reset: Press

or the IMMEDIATE menu button to reset the system

now.

NOTE:

A system reset will drop all calls in progress.