Inter-Tel Axxess User Manual
Page 43
Page 27
Administrator Procedures
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Trunk Programming
Answer Access For Day Or Night Mode: To program the station(s) that will have
answer access for this trunk group for day mode, press
or the ANS-ACCESS
DAY menu button. To program for night mode, press
or the ANS-ACCESS
NIGHT menu button. When the display shows ENTER STATION EXTENSION,
do the following:
1. Enter a station extension using one of the methods described on
2. The display shows the extension number and a Yes/No prompt. Press
or
the YES menu button, followed by
, to include the station in the list. Or,
press
or
the
NO menu button, followed by
, to exclude the station from
the list.
3. When the display returns to ENTER STATION EXTENSION, select another
extension number. Or, if finished programming the station list, press
or
ACCEPT to continue.
Ring-In For Day Or Night Mode: To program the station that will have ring in for
this trunk group for day mode, press
or the RING-IN DAY menu button. To
program for night mode, press
or the RING-IN NIGHT menu button. When the
display shows ENTER STATION EXTENSION, enter stations into the list one at a
time as described above for Answer Access.
Toll Restriction: To program the toll restrictions for the trunk group, press
or
the TOLL RESTRICTION menu button. When the display shows TOLL
RESTRICTION OPTION, press the numbers that correspond to the toll restrictions
you wish to program, as follows:
1. COS for day or night mode: To program the toll restriction class of service for
day mode, press
or the COS DAY menu button. To program class of ser-
vice for night mode, press
or the COS NIGHT menu button. The display
shows SET DAY (or NIGHT) COS XX. If this is not the COS you wish to
program, scroll to the correct COS by pressing the high end of the Volume
button or the NEXT menu button to scroll forward, or press the low end of the
Volume button or the PREVIOUS menu button to scroll backward. The
default COS numbers are listed below. (See
for definitions. COS 01
is not used for trunks.) When the correct COS is displayed, press
or the
ON menu button to enable the toll restriction. Or, press
or the OFF menu
button to disable it. If desired, repeat this step to program additional COS toll
restrictions. Then press
or ACCEPT to continue.
COS 02 – Deny Area/Office
COS 03 – Deny Operator
COS 04 – Deny Toll Access
COS 05 – Deny International
COS 06 – Deny Equal Access
COS 07 – Deny Local Calls
COS 08 – Denied Numbers
COS 09 – Allowed Numbers
2. Exempt from ARS: To program the Exempt from ARS option, press
or the
EXEMPT FROM ARS menu button. When the display shows EXEMPT
FROM ARS, press
or the YES menu button to enable the option. Or,
press
or the NO menu button to disable it. Then press
or ACCEPT to
continue.
1
2
1
#
2
#
#
3
4
5
1
2
1
2
#
3
1
2
#