Inter-Tel Axxess - Manual (Page 267)

Page 251
System Features
AXXESS ® ADMINISTRATOR’S GUIDE – January 2004
Do-Not-Disturb Override
T O PLACE YOUR BUSY STATION IN D O -N OT -D ISTURB WHILE A CALL IS CAMPED ON :
If, while on a call, you hear call waiting signals and you wish to let the caller know you do not
want to be disturbed:
Inter-Tel Phones: Press the button or press the Special button and then enter a
Do-Not-Disturb feature code (370 or 372). The button lights. The display shows DO-
NOT-DISTURB ON. The intercom caller is no longer camped on and receives Do-
Not-Disturb indications.
Single-Line Sets: (This procedure will interrupt your call in progress.) Hookflash and
enter the a Do-Not-Disturb feature code (370 or 372). The intercom caller is no longer
camped on and receives Do-Not-Disturb indications. Hookflash twice to return to the
current call.
DO-NOT-DISTURB OVERRIDE
If your Inter-Tel phone is enabled for Do-Not-Disturb override and you hear Do-Not-Disturb
tones when placing an intercom call, you may use the following procedure to break through
Do-Not-Disturb and complete the call.
D O -N OT -D ISTURB OVERRIDE (I NTER -T EL PHONES WITH THIS FEATURE ENABLED ONLY ):
When you hear Do-Not-Disturb tones while placing an intercom call, press the Special
button and enter the Do-Not-Disturb Override feature code (373). If the called station
is idle, the call rings as a private intercom call. If the called station is busy, your call
camps on.
DND