Hunt group remove/replace and do-not-disturb – Inter-Tel Axxess User Manual
Page 149
Page 133
System Features
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Hunt Group Remove/Replace and Do-Not-Disturb
HUNT GROUP REMOVE/REPLACE AND DO-NOT-DISTURB
Hunt group members can temporarily stop hunt group calls from ringing at their stations by
entering the Hunt Group Remove feature code as described below. (If a station is assigned to
more than one hunt group, this halts calls from all hunt groups. Hunt group assignments cannot
be removed individually.) Do-Not-Disturb can also be used to halt hunt group and other calls
to the station (see
for details).
NOTE:
This feature has no effect on ACD hunt groups. See
for ACD login/logout
information.
When the Hunt Group Remove feature is enabled, the user will still receive the camp-on dis-
play and tone, and the individual trunk button flashes, if one exists, for calls to the hunt group.
(The station continues to receive calls placed to its extension number.) Hunt group overflow
and announcement stations cannot block hunt group calls using this feature.
If a phone user has programmed a button for entering the Hunt Group Remove/Replace feature
code, and if that button has a lamp, the lamp will be lit whenever the station is removed from
the hunt group.
T
O
REMOVE
THE
STATION
FROM
ITS
HUNT
GROUP
(
S
)
OR
REPLACE
THE
STATION
IN
ITS
HUNT
GROUP
(
S
):
Inter-Tel Phones: While on or off hook, enter the Hunt Group Remove feature code
(322) to halt hunt group calls or enter the Hunt Group Replace feature code (323) to
return the station to its hunt group(s). Or, use the Hunt Group On/Off feature code
(324) to toggle the hunt group mode on or off. You hear a confirmation tone, and the
display shows ACCEPT (or DIVERT) HUNT GROUP CALLS. If off hook, hang up.
Single-Line Sets: Lift the handset and enter the Hunt Group Remove feature code
(322) to halt hunt group calls or enter the Hunt Group Replace feature code (323) to
return the station to its hunt group(s). Or, use the Hunt Group On/Off feature code
(324) to toggle the hunt group mode on or off. You hear dial tone.