Exiting and re-entering the conference – Inter-Tel Axxess User Manual
Page 228
Page 212
System Features
AXXESS
®
ADMINISTRATOR’S GUIDE – January 2004
Exiting and Re-Entering the Conference
Exiting and Re-Entering the Conference
T
O
EXIT
THE
CONFERENCE
AND
LEAVE
THE
OTHER
PARTIES
CONNECTED
(
ANY
INSIDE
PARTY
):
Inter-Tel Phones:
During the conference, press the
button and hang up. The
button and a
Call button flutters.
NOTE:
If all remaining parties are outside parties and the Hold timer expires while you
are out of the conference, the conference recalls your station. The recall rings at your
station and the
button flashes at the medium rate. The display shows CONFER-
ENCE RECALLING. Press the
button to return to the conference. If the recall is
not answered before the Recall timer expires, it will recall the attendant.
To return to the conference: Lift the handset and/or press the
button again.
Single-Line Sets:
During the conference, hookflash and hang up.
NOTE:
If the Hold timer expires while you are out of the conference, the parties recall
your station. When the recall rings at your station, lift the handset to answer the recall. If
the recall is not answered before the Recall timer expires, it will recall the attendant.
To return to the conference: Lift the handset and/or enter the Conference feature
code (5).
Ending the Conference and Placing All Parties on Hold
T
O
END
THE
CONFERENCE
AND
PUT
ALL
PARTIES
ON
HOLD
(
ANY
INSIDE
PARTY
):
Inter-Tel Phones:
During the conference, press the
button and hang up. The
button and a
Call button flutters. The parties are still connected in a conference.
To place the parties on individual hold: Press the Hold button or enter the Individual
Hold feature code (336). You can then return to each party individually by pressing the
associated Call or
button.
Single-Line Sets:
During the conference, hookflash and hang up. The parties are still connected in a con-
ference.
To place the parties on individual hold: Lift the handset and enter the Individual
Hold feature code (336). You can then return to each party individually by entering the
Individual Hold feature code again.
CNF
CNF
CNF
CNF
CNF
CNF
CNF
IC