Honeywell MK VI - Manual (Page 241)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 241
5.3.7 Category 7, Options Select Group #1
The following table provides identification of the Options Select Group #1. Each entry in the ID column corresponds to a
particular combination of TA&D Alternate Pop Up, Obstacle Awareness Enabled, Peaks Mode Enabled, Bank Angle
Enable, Steep Approach Enabled, Flap Reversal and GPS Altitude Reference selection. Refer to section 7.5 for
configuration messages that will be present for each option selected.
Table 5.3.7: Options Select Group #1
ID
Steep
Approach
Enabled 1
TA&D
Alternate
Pop Up
Peaks
Mode
Enabled 2
Obstacle
Awareness
Enabled
Bank Angle
Enable
Flap
Reversal
GPS Altitude
Reference 3
Software
Effectivity
0 False False False False False False WGS-84 -020
1 False False False False False False MSL -020
2 False False False False False True WGS-84 -020
3 False False False False False True MSL -020
4 False False False False True False WGS-84 -020
5 False False False False True False MSL -020
6 False False False False True True WGS-84 -020
7 False False False False True True MSL -020
8 False False False True False False WGS-84 -020
9 False False False True False False MSL -020
10 False False False True False True WGS-84 -020
11 False False False True False True MSL -020
12 False False False True True False WGS-84 -020
13 False False False True True False MSL -020
14 False False False True True True WGS-84 -020
15 False False False True True True MSL -020
16 False False True False False False WGS-84 -020
17 False False True False False False MSL -020
18 False False True False False True WGS-84 -020
19 False False True False False True MSL -020
20 False False True False True False WGS-84 -020
21 False False True False True False MSL -020
22 False False True False True True WGS-84 -020
23 False False True False True True MSL -020
24 False False True True False False WGS-84 -020
25 False False True True False False MSL -020
26 False False True True False True WGS-84 -020
27 False False True True False True MSL -020
28 False False True True True False WGS-84 -020
29 False False True True True False MSL -020
30 False False True True True True WGS-84 -020
31 False False True True True True MSL -020
32 False True False False False False WGS-84 -020
33 False True False False False False MSL -020
34 False True False False False True WGS-84 -020
35 False True False False False True MSL -020
1 TRUE enables steep approach selection via Steep Approach Select Discrete (see Section 5.3.13 and 6.6.25).
2 Enables PEAKS mode display if display supports (see display configuration group Section 5.3.6)
3 "MSL" reference must be selected when an internal GPS is utilized (Refer to Table 5.3.3-2).