Honeywell MK VI - Manual (Page 19)

Honeywell
MK VI MK VIII EGPWS Installation Design Guide
Proprietary notice on title page applies
CAGE CODE: 97896 SCALE: NONE SIZE: A DWG NO: 060-4314-150 REV: SHEET 19
The MK VI EGPWS is normally shipped with an AMERICAS Terrain database. When ordering a MK VI EGPWS that will be
operating in the ATLANTIC or PACIFIC
1 region the specific Terrain database must be specified with the order.
NOTE 1: Terrain Database cards for the ATLANTIC or PACIFIC region are no longer required to be ordered separately.
NOTE 2: -XXX defines Application software version.
1.7.2 MK VIII EGP WS
The MK VIII EGPWS is available in two versions, with internal GPS card or without. The part number for the
units is as follows:
965-1210-XXX without internal GPS card 1
965-1220-XXX with Internal GPS card 1
The MK VIII EGPWS is shipped with a world Terrain database.
NOTE 1: -XXX defines Application software version.
1.7.3 Configurati on Module
The MK VI/MK VIII EGPWS Configuration Module is available in two versions. When ordering the Configuration
Module, order part number 700-1710-020 or part number 700-1710-001. The part number 700-1710-020 is
required for installations with internal GPS.
1.7.4 Smart Cabl e (PCMCIA Interface)
The MK VI/MK VIII EGPWS Smart Cable is available in one version. The Smart Cable is used for Line
Maintenance; Application/Configuration code and Terrain Database uploads and Flight History downloads.
Only one Smart Cable is required for an installation house or operator. When ordering the Smart Cable,
order part number 951-0386-001.
1.8 Installation Kits and Accessories
NOTE: Not all installation kits are immediately available, contact Honeywell Order
Administration (425-885-8719) for availability.
1.8.1 MK VI/MK V III EGPWS Installation Kits
Note: For all parts in the Installation kits the weight of each part is less than 0.25 pounds.
(A) Retrofit classic MK VI GPWS installation
The MK VI/MK VIII EGPWS Installation Kit, P/N 755-7013-011, contains the following parts:
Vendor Name
Vendor P/N Description QTY UM Honeywell P/N
Positronic Ind. RD50F1OJVLC-15 P2 connector 1 EA 440-1233-001
Honeywell 700-1710-020 Configuration Module 1 EA 700-1710-020
(B) New EGPWS installation
The MK VI/MK VIII EGPWS Installation Kit, P/N 755-7013-010, contains the following parts:
Vendor Name
Vendor P/N Description QTY UM Honeywell P/N
Positronic Ind. DD78F1OJVLC-15 P1 connector, female 1 EA 440-1158-009
Positronic Ind. RD50F1OJVLC-15 P2 connector, female 1 EA 440-1233-001
Honeywell 700-1710-020 Configuration Module 1 EA 700-1710-020