HEIDENHAIN iTNC 530 (60642x-04) Cycle programming - Manual (Page 70)

70 Fixed Cycles: Drilling
3.1 F
undamentals
3.1 Fundamentals
Overview
The TNC offers 9 cycles for all types of drilling operations:
Cycle Soft key Page
240 CENTERING
With automatic pre-positioning, 2nd
set-up clearance, optional entry of the
centering diameter or centering depth Seite 71
200 DRILLING
With automatic pre-positioning, 2nd
set-up clearance Seite 73
201 REAMING
With automatic pre-positioning, 2nd
set-up clearance Seite 75
202 BORING
With automatic pre-positioning, 2nd
set-up clearance Seite 77
203 UNIVERSAL DRILLING
With automatic pre-positioning, 2nd
set-up clearance, chip breaking, and
decrementing Seite 81
204 BACK BORING
With automatic pre-positioning, 2nd
set-up clearance Seite 85
205 UNIVERSAL PECKING
With automatic pre-positioning, 2nd
set-up clearance, chip breaking, and
advanced stop distance Seite 89
208 BORE MILLING
With automatic pre-positioning, 2nd
set-up clearance Seite 93
241 SINGLE-LIP DEEP-HOLE
DRILLING
With automatic pre-positioning to
deepened starting point, shaft speed
and coolant definition Seite 96