HEIDENHAIN iTNC 530 (60642x-04) Cycle programming - Manual (Page 271)

HEIDENHAIN iTNC 530 271
1
0
.5 F
A
CE MILLING (Cy
c
le 232, DIN/ISO:
G232)
Please note while programming:
Cycle parameters
 Machining strategy (0/1/2) Q389: Specify how the
TNC is to machine the surface:
0: Meander machining, stepover at positioning feed
rate outside the surface to be machined
1: Meander machining, stepover at feed rate for
milling within the surface to be machined
2: Line-by-line machining, retraction and stepover at
the positioning feed rate
 Starting point in 1st axis Q225 (absolute): Starting
point coordinate of the surface to be machined in the
reference axis of the working plane. Input range
-99999.9999 to 99999.9999
 Starting point in 2nd axis Q226 (absolute): Starting
point coordinate of the surface to be multipass-milled
in the minor axis of the working plane. Input range
-99999.9999 to 99999.9999
 Starting point in 3rd axis Q227 (absolute):
Coordinate of the workpiece surface used to calculate
the infeeds. Input range -99999.9999 to 99999.9999
 End point in 3rd axis Q386 (absolute): Coordinate
in the spindle axis to which the surface is to be face
milled. Input range -99999.9999 to 99999.9999
Enter the 2nd set-up clearance in Q204 so that no collision
with the workpiece or the fixtures can occur.
Danger of collision!
Enter in MP7441 bit 0 whether the TNC should output an
error message (bit 0=0) or not (bit 0=1) if spindle rotation
is not active when the cycle is called. The function also
needs to be adapted by your machine manufacturer.
X
Y
Q226
Q225
Q21
9
Q218
X
Z
Q227
Q386