HEIDENHAIN iTNC 530 (60642x-04) Cycle programming User Manual
Page 273
HEIDENHAIN iTNC 530
273
1
0
.5 F
A
CE MILLING (Cy
c
le 232, DIN/ISO:
G232)
Feed rate for milling
Q207: Traversing speed of the
tool in mm/min during milling. Input range 0 to
99999.9999; alternatively FAUTO, FU, FZ
Feed rate for finishing
Q385: Traversing speed of
the tool in mm/min while milling the last infeed. Input
range 0 to 99999.9999; alternatively FAUTO, FU, FZ
Feed rate for pre-positioning
Q253: Traversing
speed of the tool in mm/min when approaching the
starting position and when moving to the next pass.
If you are moving the tool transversely to the material
(Q389=1), the TNC moves the tool at the feed rate for
milling Q207. Input range 0 to 99999.9999;
alternatively FMAX, FAUTO, PREDEF
Set-up clearance
Q200 (incremental): Distance
between tool tip and the starting position in the tool
axis. If you are milling with machining strategy
Q389=2, the TNC moves the tool at the set-up
clearance over the current plunging depth to the
starting point of the next pass. Input range 0 to
99999.9999; alternatively PREDEF
Clearance to side
Q357 (incremental): Safety
clearance to the side of the workpiece when the tool
approaches the first plunging depth, and distance at
which the stepover occurs if the machining strategy
Q389=0 or Q389=2 is used. Input range 0 to
99999.9999
2nd set-up clearance
Q204 (incremental): Coordinate
in the spindle axis at which no collision between tool
and workpiece (fixtures) can occur. Input range 0 to
99999.9999; alternatively PREDEF
Beispiel: NC blocks
71 CYCL DEF 232 FACE MILLING
Q389=2
;STRATEGY
Q225=+10
;STARTING POINT 1ST AXIS
Q226=+12
;STARTING POINT 2ND AXIS
Q227=+2.5 ;STARTING POINT 3RD AXIS
Q386=-3
;END POINT IN 3RD AXIS
Q218=150
;1ST SIDE LENGTH
Q219=75
;2ND SIDE LENGTH
Q202=2
;MAX. PLUNGING DEPTH
Q369=0.5
;ALLOWANCE FOR FLOOR
Q370=1
;MAX. OVERLAP
Q207=500
;FEED RATE FOR MILLING
Q385=800
;FEED RATE FOR FINISHING
Q253=2000 ;F PRE-POSITIONING
Q200=2
;SET-UP CLEARANCE
Q357=2
;CLEARANCE TO SIDE
Q204=2
;2ND SET-UP CLEARANCE