HEIDENHAIN SW 68894x-02 - Manual (Page 83)

HEIDENHAIN CNC PILOT 640 83
3.4 Set
ting up a t
ool list
3.4 Setting up a tool list
Machine with turret
The tools used are listed in the turret list. The ID number of the
mounted tool is assigned to every tool holder in the turret.
In the Teach-in cycle you program the turret position as T number.
The tool ID number is automatically entered under "ID."
The turret list can be set up through the TSF menu or directly from the
cycle dialogs in the Teach-in mode.
 T turret pocket number
 Tool ID (name) is entered automatically.
 Open the Turret list. If the cursor is on the ID input
field, the CNC PILOT also automatically opens the
tool list with the entries in the tool database.
Machine with multifix
Machines with multifix tool holders have one tool pocket in which the
tools are changed manually.
 T turret pocket number: Always T1
 Tool ID (name): Select the ID number from the tool list
 Open the Tool list.
The turret and multifix tool systems can be used together
on one machine. The machine tool builder defines the
number of the multifix pocket.