HEIDENHAIN SW 68894x-02 - Manual (Page 475)

HEIDENHAIN CNC PILOT 640 475
6.3 V
iews
3-D view
 The "3-D View" menu item switches to a perspective
view.
With the 3-D view, you can display the workpiece, auxiliary contour
and finished part in a solid-model view. If there are two or more
auxiliary contours in the program, they are displayed by pressing the
"auxiliary contour" soft key repeatedly. The "workpiece" display shows
the defined workpiece blank or the workpiece after respective stages
of machining.
With the menu functions you can rotate the graphic around the
principal axes X, Y and Z. The "perspective view" soft key resets the
graphic to its initial condition.
Soft keys for miscellaneous functions
Displays a transparent
workpiece.
Displays the workpiece.
Displays the finished part.
Displays an auxiliary contour.
Displays a section view.
Selects the front view.
Selects the perspective view.
Menu assignment for 3-D view
Rotate graphics in positive direction
around the X axis.
Rotate graphics in positive direction
around the Y axis.
Rotate graphics in positive direction
around the Z axis.
Rotate graphics in negative direction
around the X axis.
Rotate graphics in negative direction
around the Y axis.
Rotate graphics in negative direction
around the Z axis.
The workpiece, auxiliary contour, and finished-part soft
keys are displayed regardless of the content of the
program.