HEIDENHAIN SW 68894x-02 - Manual (Page 584)

584 Tables and overviews
9.3
Te
chnical
inf
o
rm
ation
Programming – Teach-in mode (optional)  Turning cycles for simple and complex contours, and contours
described with ICP
 Contour-parallel turning cycles
 Recessing cycles for simple or complex contours, or contours
defined with ICP
 Repetitions with recessing cycles
 Recess turning cycles for simple and complex contours, and
contours described with ICP
 Undercut and parting cycles (optional)
 Engraving cycles
 Threading cycles for single or multi-start longitudinal, taper or API
threads
 Cycles for axial and radial drilling, pecking and tapping operations
with the C axis
 Thread milling with the C axis
 Axial and radial milling cycles for slots, figures, single surfaces and
polygons as well as for complex contours defined with ICP for
machining with the C axis
 Helical slot milling with the C axis
 Linear and circular patterns for drilling and milling operations with the
C axis
 Context-sensitive help graphics
 Transfer of cutting values from technology database
 Use of DIN macros in Teach-in programs
 Conversion of Teach-in programs to smart.Turn programs
Interactive contour programming (ICP)
(optional)
 Contour definition with linear and circular contour elements
 Immediate display of entered contour elements
 Calculation of missing coordinates, intersections, etc.
 Graphic display of all solutions for selection by the user if more than
one solution is possible
 Chamfers, rounding arcs and undercuts available as form elements
 Input of form elements immediately during contour creation or by
superimposition later
 Changes to existing contours can be programmed
 Programming of the rear face for full-surface machining with the C
and Y axes
C-axis machining on face and lateral surface  Description of individual holes and hole patterns
 Description of figures and figure patterns for milling operations
 Creation of freely definable milling contours
Y-axis machining in the XY and ZY planes  Description of individual holes and hole patterns
 Description of figures and figure patterns for milling operations
 Creation of freely definable milling contours
User functions