beautypg.com

5 types of programs, 5 ty pes of pr ogr ams 2.5 types of programs – HEIDENHAIN SW 68894x-02 User Manual

Page 59

background image

HEIDENHAIN CNC PILOT 640

59

2.5

Ty

pes

of

pr

ogr

ams

2.5 Types of programs

The CNC PILOT supports the following programs/contours:

Teach-in programs

(cycle programs) are used in the "Teach in"

mode of operation.

smart.Turn

and DIN main programs are written in the smart.Turn

mode of operation.

DIN subprograms

are written in the smart.Turn operating mode

and are used in cycle programs and smart.Turn main programs.

ICP contours

are generated during Teach-in in the Teach-in or

Manual mode of operation. The extension depends on the contour

described.

In smart.Turn the contours are saved directly in the main program.

Program type

Folders

Extension

Teach-in programs

(cycle programs)

"nc_prog\gtz"

"*.gmz"

smart.Turn and DIN

main programs

"nc_prog\ncps"

"*.nc"

DIN subprograms

"nc_prog\ncps"

"*.ncs"

ICP contours

"nc_prog\gti"

Turning contours

"*.gmi"

Contours of

workpiece blanks

"*.gmr"

Contours on face

"*.gms"

Lateral surface

contours

"*.gmm"