HEIDENHAIN SW 68894x-02 - Manual (Page 557)

HEIDENHAIN CNC PILOT 640 557
8.3 T
ransf
er Data transfer options
The CNC PILOT manages DIN programs, DIN subprograms, cycle
programs and ICP contours in different directories. When you select
"Program group," the control automatically switches to the applicable
directory.
Parameters and tool data are stored under the file name entered for
Backup name
and saved to a ZIP file located in the "para" or "tool" folder
on the control. You can then send this backup file to a project folder in
the remote station.
The following transfer functions are available:
 Programs : Transmitting and receiving files
 Back up parameters : Creating, transmitting and receiving
 Restore parameters : Reloading the parameter backup files
 Backup tools : Creating, transmitting and receiving
 Restore tools : Reloading the tool backup files
 Service data : Creating and transmitting service data
 Make data backup : Saving all data in a project folder
 Free external : Freely selecting program files on a USB storage
device
 Misc. functions : Importing the cycle programs and DIN programs of
the MANUALplus 4110
Transfer folder
The control exchanges data with an external storage device by
accessing transfer folders created in the storage device. Files in
transfer folders are organized using the same folder structure as on
the control.
Transfer folders can only be used directly in the selected network path
or in the root directory of the USB storage device.
Folder structure – Storage of files
Folders File types
\dxf Drawings in DXF format
\gtb Machining sequences (TURN PLUS)
\gti ICP contour descriptions
 *.gmi (turning contour)
 *.gmr (workpiece-blank contour)
 *.gms (C axis, face)
 *.gmm (C axis, surface)
\gtz Cycle programs (teach-in)
 *.gmz
\ncps DIN programs (smart.Turn)
 *.nc (main programs)
 *.ncs (subprograms)
\para Parameter backup files
 PA_*.zip (parameters)
\table Parameter backup files
 TA*.zip (tables)
\tool Tool backup files
 TO*.zip (tool data and technology
data)
\pictures Image files for subprograms
 *.bmp/png/jpg
\data Service files
 Service*.zip
 If program files are opened in another operating mode,
they are not overwritten.
 You can only load tool data and parameters when no
program is executed in Program Run mode.