HEIDENHAIN SW 68894x-02 - Manual (Page 245)

HEIDENHAIN CNC PILOT 640 245
4.5
Recessing
cy
cles
Type of machining for technology database access: Recess turning
Cycle run
1 Approach workpiece from starting point on paraxial path
2 Finish first side and contour area up to position just before end
point X2, Z2
3 Approach workpiece for finishing the second side on paraxial path
4 Finish second side, then finish remainder of contour valley
5 Return to starting point on paraxial path
6 Move to the tool change point according to the G14 setting
MFS M at beginning: M function that is executed at the
beginning of the machining step
MFE M at end: M function that is executed at the end of the
machining step
WP Displays which workpiece spindle is used to process the
cycle (machine-dependent)
 Main drive
 Opposing spindle for rear-face machining