HEIDENHAIN SW 68894x-02 - Manual (Page 516)

516 Tool and technology database
7.
4
Te
chnolog
y
database
Editing a workpiece material or cutting material
list
Work material list
Select the "Work materials" menu item. The editor
opens the list with the workpiece material
designations.
Adding a workpiece material:
Press the soft key. Enter the workpiece designation
(maximum 16 characters). The sorting number is
assigned sequentially.
Deleting a workpiece material:
Press the soft key. After the confirmation request,
the CNC PILOT deletes the workpiece material with
all associated cutting data
.
Cutting material list
Select the "Cutting materials" menu item. The editor
opens the list with the cutting material designations.
Adding a cutting material:
Press the soft key. Enter the cutting material
designation (maximum 16 characters). The sorting
number is assigned sequentially.
Deleting a cutting material:
Press the soft key. After the confirmation request,
the CNC PILOT deletes the cutting material with all
associated cutting data
.
The sorting number only specifies the sequence within the list. To
change the sorting number: Select the sorting number, press the Edit
field
soft key and enter the new number.
Expanding the workpiece-material or cutting-material lists
does not create cutting data. The data record for cutting
data of a new workpiece material/cutting material
combination is not created until you have requested it
through the New data record soft key.