HEIDENHAIN SW 68894x-02 - Manual (Page 61)

HEIDENHAIN CNC PILOT 640 61
2.6
The
er
ro
r
messag
es
Detailed error messages
The CNC PILOT displays possible causes of the error and suggestions
for solving the problem:
Information on error causes and remedies:
 Open the error window.
 Position the cursor on the error message and press
the soft key. The CNC PILOT opens the window with
information on the error cause and corrective action.
 To exit the info, press the Info soft key again.
"Details" soft key
The DETAILS soft key supplies information on the error message.
This information is only required if servicing is needed.
 Open the error window.
 Position the cursor on the error message and press
the soft key. The CNC PILOT opens the window with
internal information about the error.
 To leave Details, press the DETAILS soft key again.