3 t ransf er – HEIDENHAIN SW 68894x-02 User Manual
Page 551

HEIDENHAIN CNC PILOT 640
551
8.3 T
ransf
er
Press the Configuration button to open the Configuration menu:
Setting
Meaning
Status
Interface active
:
Connection status of the selected Ethernet
interface
Name
:
Name of the interface you are currently
configuring
Plug connection:
Number of the plug connection of this
interface on the logic unit of the control
Profile
Here you can create or select a profile in which
all settings shown in this window are stored.
HEIDENHAIN provides two standard profiles:
DHCP-LAN
:
Settings for the standard Ethernet interface,
should work in a standard company network.
MachineNet
:
Settings for the second, optional Ethernet
interface; for configuration of the machine
network
Press the corresponding buttons to save, load
and delete profiles
IP address
Automatically procure IP address
option:
The control is to procure the IP address from
the DHCP server
Set the IP address manually
option:
Manually define the IP address and subnet
mask. Input: Four numerical values separated
by points, in each field, e.g. 160.1.180.20 and
255.255.0.0