HEIDENHAIN SW 68894x-02 - Manual (Page 558)

558 Organization mode of operation
8.3 T
ransf
er Transferring programs (files)
Selecting the program group
Press the Transfer soft key (login required).
Press the Connections soft key.
Press the USB soft key.
Press the Network soft key.
Select a project folder and press the Selection soft
key (USB), or the
Connect (network) soft key.
Return to data selection.
Switch to program transfer.
Open a selection of program types.
Activate DIN programs (or other program types) for
transfer.
Soft keys for program group selection
*.nc: DIN and smart.Turn main
programs. The transfer function scans
the programs for subprograms and
asks whether you want to transfer
them as well.
*.ncs: DIN and smart.Turn
subprograms. Help graphics assigned
to the subprogram are also
transferred.
*.gmz: Cycle programs. The transfer
function scans the programs for
subprograms and ICP contours, and
asks whether you want to transfer
them as well.
ICP contours for cycle programs
 *.gmi (turning contour)
 *.gmr (workpiece-blank contour)
 *.gms (C axis, face)
 *.gmm (C axis, lateral surface)
Allows selecting program files on a
USB storage device without using a
project folder.
Masking the file names within the
selected program group.