Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 71)

Configuring storage without hot spare drives
July 27, 2001 Profile XP System Guide 71
Configuring storage without hot spare drives
In order to use the Profile XP system, you must use Disk Utility to configure the
PFC500 Fibre Channel RAID storage system.
Creating a video file system involves:
• Binding any unbound disk modules
• Creating and naming the video file system
NOTE: If you want to use hot spare drives in your system, do not perform this
procedure. Instead, perform the procedures in “Configuring storage to include hot
spare drives” on page 75.
To configure the PFC 500 storage system:
1. Start Configuration Manager using the desktop shortcut or by selecting Start |
Programs | Profile Apps | Configuration Manager . The Configuration Manager
dialog box appears.
2. Click File System in the Configuration Manager window. Page 1 of the Disk Utility
dialog box appears.
NOTE: For simplicity, this example shows only a 30 disk system in the Disk Utility.