Modifying video input settings, Setting up the vitc reader – Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 128

Chapter 5
Modifying a Channel: Video Settings
128
Profile XP System Guide
July 27, 2001
Modifying video input settings
You can modify the video input settings.
• You can select whether the input freezes or displays black when the video input
signal is lost.
• You can select which lines of the vertical blanking interval will be recorded
uncompressed.
• You can set up the VITC reader.
Setting up the VITC reader
All video inputs include VITC readers. A reader has two VITC detection modes:
Automatic and Manual. When you select automatic detection, you can set the range
of vertical interval lines scanned to find the VITC signal pair; lines 10 to 21 by default.
Manual allows you to choose specific line numbers to detect the VITC signals.
Automatic detection is the default setting. In manual VITC detection, you can specify
the lines used to read VITC. Use manual detection when two sets of VITC are
embedded in the video signal.
To set up the VITC reader:
1. Choose Video Input in the Configuration Manager window. The Video Input
dialog box appears.
2. Click
Next
to navigate to Video Input page 2 of 3.
3. Select a video input from the list or click
Select All
to configure all video inputs at
the same time.