Determining the audio formats available, Chapter 6 modifying a channel: audio settings – Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 150

Chapter 6
Modifying a Channel: Audio Settings
150
Profile XP System Guide
July 27, 2001
Determining the audio formats available
The Profile XP system can be configured to operate with analog, AES/EBU digital,
and digital embedded (SMPTE 272M Level A) audio. An interface chassis is required
for analog audio and AES/EBU digital audio as shown in the table. If you are using
only embedded audio, no interface chassis is required.
NOTE: Interface chassis must be connected to both Audio boards for operation
with 32 channels of analog or AES/EBU digital audio.
Audio Chassis
Models
a
a.
See Appendix C for detailed rear panel views of the audio interface chassis.
Number of
Analog
Audio
Channels
Number of
AES/EBU
Audio
Channels
Comments
PAC216
(includes PACXLR
breakout chassis)
16
16
The 16 audio channels on the Profile XP audio
board are divided into eight audio pairs. You
can assign the input for each audio pair to
either the analog or digital inputs of the
PAC216. For example, the input to channels
1 & 2 can be assigned to analog input 1 & 2 or
digital input 1 & 2 on the PAC216. The audio
output channels 1 to 16 are always assigned to
both analog and digital outputs 1 to 16 on the
PAC216.
XLR216
none
16
Provides digital audio interface using XLR
connectors.
BNC 216
none
16
Provides digital audio interface using BNC
connectors.