Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 115

Options for timing asynchronous feeds
July 27, 2001
Profile XP System Guide
115
To select the input timing mode for an asynchronous video input:
1. Choose
Video Input
in the Configuration Manager window. The Video Timing
dialog box appears.
2. Click
Next
to navigate to Video Input page 3 of 3.
3. Select an input from the list or click
Select All
.
4. Select the video timing option for your application. Refer to the following:
• “Auto-time using the internal frame sync (default)” - Select this mode to ensure
clean switching between the video input and decoder outputs (playback).
• “Allow signal to pass asynchronously” - Select this mode when you want to be
sure that all video frames are recorded and are not using the signal in E to E
mode.
NOTE: If you are using the Profile XP Media Platform to switch between video
inputs and decoder outputs (playback), you must set the output timing mode to E to
E Timed Outputs. For more information see “Adjusting video output timing” on
page 107.
5. Click
Finish
.