Enabling or disabling ntsc pedestal – Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 142

Chapter 5
Modifying a Channel: Video Settings
142
Profile XP System Guide
July 27, 2001
Enabling or disabling NTSC pedestal
When the Profile XP system is configured in the 525/60 standard, the Video Monitor
board generates NTSC signals. You can select whether or not the NTSC output
includes the 7.5 IRE pedestal. Use NTSC with Pedestal if your video monitors were
calibrated using signals with 7.5 IRE setup.
To enable or disable NTSC pedestal:
1. Select Video Monitor in the Configuration Manager window. Page 1 for the Video
Monitor dialog box appears.
2. Choose a monitor output in the Video Monitor Setup list, or click
Select All
.
3. Use the check box to enable or disable the 7.5 IRE pedestal as required.
4. Click
Finish
to save your settings.