Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 187)

Recording or generating LTC
July 27, 2001 Profile XP System Guide 187
Recording or generating LTC
The Profile XP system provides four LTC inputs and outputs. Use Configuration
Manager to setup a channel to record or output LTC.
To set up a channel to read or generate LTC:
1. Select Channel Configuration in the Configuration Manager window.
2. Click the tab for the channel you want to configure.
3. Click on a timecode track in the configuration tree or click Add Track to add a new
one.
4. Click the Crosspoints button, then do one or both of the following:
- Select one of the LTC inputs to use as the timecode source for the channel.
- Select one of the LTC outputs to use as the timecode output for the channel.
5. Click Finish to save your settings.