Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 138)

Chapter 5 Modifying a Channel: Video Settings
138 Profile XP System Guide July 27, 2001
Erasing the horizontal blanking interval
You can configure a video output to erase the horizontal blanking interval. Use this
feature to remove ancillary data such as Error Detection and Handling (EDH)
information. Embedded audio present on the output is not effected.
To erase the horizontal blanking interval:
1. Choose Video Output in the Configuration Manager Window. The Video Output
dialog box appears.
2. Click Next to navigate to Video Output page 3 of 3.
3. Select a video output from the list or click Select All to configure all the video
outputs at the same time.
4. Select the Erase horizontal blanking interval check box.
5. Click Finish to saving your settings.