Mounting panels and audio chassis – Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 277

Mounting Panels and Audio Chassis
July 27, 2001
Profile XP System Guide
277
Mounting Panels and Audio Chassis
Refer to the information that follows when mounting panels and the Profile XP audio
chassis:
• The I/O Panel is 1 RU high with the mounting holes spaced 1.250 inches
(3.175 cm) apart.
• The XLR 216 is 2 RUs high with holes spaced 3.000 inches (7.62 cm) apart.
• The BNC216 is 1 RU high with the mounting holes spaced 1.250 inches
(3.175 cm) apart.
• The PAC216 audio chassis is 2 RU high with holes spaced 3.00 inches (7.62 cm)
apart.
The I/O Panel, XLR216 and BNC 216 panels mount at the back of the rack with four
pan head screws. Ensure that there is room to make cable connections and mount in
any order which allows connection to the Profile XP system.