Grass Valley PVS Series System Guide v.4.0 Dec 10 200 User Manual
Page 158

Chapter 6
Modifying a Channel: Audio Settings
158
Profile XP System Guide
July 27, 2001
2. Click the left-hand drop-down list arrow in the
Embedded
column for the channel pair
you want to configure, and select a video output as shown.
NOTE: With one audio board, only the first 4 video outputs are selectable.
3. Click the right-hand drop-down list arrow in the
Embedded
column for the channel
pair you want to configure, and select an audio group and channel pair as shown.
NOTE: Up to two audio groups (8 audio channels) can be embedded on a single
video output.
4. Click
Finish
to save your settings.
This manual is related to the following products: