Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 133)

Modifying video output settings
July 27, 2001 Profile XP System Guide 133
Modifying video output settings
Use Configuration Manager to change video output settings
• Set up the VITC generator
• Erase unwanted lines in the vertical blanking interval
• Erase the horizontal blanking interval
• Select whether the video output will freeze or display black when the video
output is lost.
Setting up the VITC generator
All video outputs include VITC generators. You can select the line number used to
insert the VITC signals.
To set up the VITC generator:
1. Choose Video Output in the Configuration Manager window. The Video Output
dialog box appears.
2. Click Next to navigate to Video Output page 2 of 3.
3. Select a video outputs from the list or click Select All to configure all video outputs
at the same time.