Grass Valley PVS Series System Guide v.4.0 Dec 10 200 - Manual (Page 249)

Testing the Ethernet Video network
July 27, 2001 Profile XP System Guide 249
3. In the Ping Window, select the Ping the Interface option.
4. Type le0 in the text box, then click Ping . Make sure to enter a zero not an O. All
Profile systems are asked to respond.
Wait for ping results.
5. Check the Ping Results window, then do one of the following:
a. If only the local system responded, there is a problem with the video Ethernet
network connectivity. Verify the video Ethernet connections for all systems,
then review all configuration steps under “Setting up a simple video network:
Ethernet” on page 218. Repeat step 4. If there is still a problem, refer to the
Profile XP Service Manual.
b. If all systems responded, but a Profile system name is missing or incorrect, there
is an error in the HOSTS file. Refer to “Manually Edit the hosts file on each
Profile XP” on page 220.
NOTE: You can use the “Ping the Site” option to ping a specific Profile system
using it’s IP address or name, for example Profile_le0. Pinging by name requires
the HOSTS file to be correct. Pinging the IP address does not require the HOSTS
file.