Run sequence, Dve mode, Bypass – Grass Valley Imagestore 750 v.2.0.1 User Manual
Page 71: None (delay), Enabled
Imagestore 750 User Manual
Front Panel Operations
Miranda Technologies Inc.
Page 71
Run Sequence
Using the joystick arrows ⊳ select the appropriate DVE sequence between
1 – 97. Press enter to accept the value and play the sequence. When sequence
is selected this plays the previously selected sequence in reverse.
DVE Mode
The following DVE modes can be selected altering the video path within the
system. Modes can be set independently for program (PGM) and preview
(PVW) channels.
Bypass
DVE mode out of circuit (bypassed) therefore no video frame delay added.
None (Delay)
DVE mode in circuit but inactive. DVE compensating Video delay is in
circuit.
Enabled
With DVE enabled, the DVE mode is in circuit and active. DVE
compensating Video delay is in circuit.
The inputs for each DVE channel are defined via the DVE 1 Input and DVE
2 Input menus (see page 73), thereby giving a large number of possible DVE
effect combinations.
The position of the DVE relative to keyers is defined via the DVE Config
menu (page 76) into one of the possible modes shown below: