Automax, Mode, Up-mix processing times – Grass Valley Imagestore 750 v.2.0.1 User Manual
Page 386

Up-Mix
Imagestore 750 User Manual
Page 386
Miranda Technologies Inc.
AutoMAX
TM
Mode
This mode will automatically switch between stereo and 5.1 at its input to
provide 5.1 output at all times. This ensures a fully automatic delivery of 5.1
audio to the consumer.
Note: When AutoMAX™ is enabled, the input channels 1-2 (L/R) are
always up-mixed onto outputs 1-6 (L/R/C/LFE/Ls/Rs). If input
channels 3-6 are also present then these signals are mixed onto
the up-mixed C/LFE/Ls/Rs outputs. In summary there is no
dynamic signal detection between 5.1 and stereo inputs.
Up-Mix Processing Times
Up-Mix processing takes one video frame to perform.
Type
Video Frames
Up-Mix
1
The Imagestore 750 has built-in video delays that allow the user to
compensate for this delay. This is covered for Dolby modules on page 375,
and exactly the same principles apply to Up-Mix.