Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 291)

Imagestore 750 User Manual Standard Mixfiles
Miranda Technologies Inc. Page 291
Standard Mixfiles
Introduction
A set of mixfiles are provided as standard with the Imagestore software and
are stored in /etc/mixes. Customised mixfiles may also be added to the
Imagestore via the front panel, and these are stored in /home/mixes. The
preferred mixfile can be selected via the front panel (see page 129) and this
will configure the audio engine the next time the Imagestore is restarted.
Audio functionality can be controlled via automation commands. A small set
of commands are used within this appendix. Please refer to the Oxtel
Automation Protocol document for more detail of these commands, or
contact Miranda Support for further information.
The following list gives a brief description of each of the standard mixfiles.
Mixfiles with the string “eply” in the file name are designed to work with the
Easyplay sound clip playout system and will only be available for use on
units that have the Easyplay licence installed.
Mixfile Name Description
is23.mix One group of AB mixing with group
selection (including AES)
Dual AES voice-overs
Embedded and AES output
is23eply.mix One group of AB mixing with group
selection (including AES)
Single AES voice-overs + Easyplay
Embedded and AES output
16chn_emb_pass.mix 16 channel embedded pass-through
16chn_AES_pass.mix 16 channel AES pass-through
16chn_AB.mix 16 channel embedded AB mixing