Select mixfile – Grass Valley Imagestore 750 v.2.0.1 User Manual
Page 129

Imagestore 750 User Manual
Front Panel Operations
Miranda Technologies Inc.
Page 129
A/B Mix
Set On or Off.
If set On the system will perform an audio AB mix that follows the video AB
mixer position. If the video transition type is set as V-Fade then the audio
will transition through silence at the half way point of the mix.
Fade-to-Black
Set On or Off.
If set On the system will fade to silence as the most downstream keyer
(DSK4) is faded to black.
Easyplay
The following are Imagestore 2 legacy options:
Follow DSK
Set On or Off.
If set to On the system will search for a corresponding audio file (.oxe) with
the same filename prefix as the image loaded onto a DSK and play it out
when the graphic is cut up.
Use Voiceover
Set On or Off.
If set to On the system will activate Voiceover 1 when Easyplay is started.
Select Mixfile
Audio parameters are configured via audio mixfiles. A set of standard
predefined mixfiles are stored in /etc/mixes. Custom mixfiles are stored in
/home/mixes. A special case custom mixfile “generated.mix” is optionally
generated from the Route Manager audio setup in the Configurator tool.
Use this option to select a mixfile from either directory.
The current mixfile (along with its path location) will be displayed on the
front panel display. Use the joystick arrows (⊳ enter) to select and
confirm a new file.
•
Select
Once selected a message is displayed "New setting takes effect on restart".