Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 243)

Imagestore 750 User Manual Graphics Co-Processor
Miranda Technologies Inc. Page 243
0xB 0x7
0xC 0x8
0xD 0x9
0xE 0xA
0xF 0xB
Using this method of load and control commands we can now address up to
16 keying layers, four in Imagestore and twelve in Intuition.
Imagestore Intuition Control
The Imagestore 750 has to be configured to operate with an Intuition. From
the front panel select:
Setup > System Setup > Serial Comms > COM1- 4 > Protocol > Intuition.
The control port is used to forward selected commands to the Intuition (at
19.2KHz). The commands highlighted below are the ones supported.
Cmd Description
0 Fade To/From Black
1 Fade Keyer Up/Down
2 Cut To/From Black
3 Cut Keyer Up/Down
@ Set Fader Angle
B Set Transition Duration
8 Load Image From Library
9 Save Image To Library
G Set Image Position
I File Save Masked
A Erase Store
O Enquire Loaded Image Status
F Set Clip Gain Transparency