Grass Valley Imagestore 750 v.2.0.1 - Manual (Page 162)

Front Panel Operations Imagestore 750 User Manual
Page 162 Miranda Technologies Inc.
DSK 1
Image Border
Displays a full screen test pattern of 4 pixel width coloured borders
Animation Fill
Imagestore 750 has a self-test program to verify the correct installation of
store memory modules. The Animation Fill self test will generate an
animation sequence to fill the store memory module of the given layer.
The animation is no different from one loaded from a file, and in particular:
•
For the animation to fill the store, either (i) the Image Load Mode
must be Clean Load, or (ii) any existing image on that layer must be
unloaded.
•
For the animation to be visible, the layer must be cut up.
•
If the store memory allocation associated with the DSK is less than
512MB then the animation will only complete an appropriate
percentage of its total.
•
The animation can be repositioned, masked, and unloaded in the
normal way.
The animation is in the form of a progress bar, filling the image from left to
right with a green background, keyed as a ramp, and repeating continuously.
•
Each column that the green traverses equates to 64MB of store
memory allocation. At 59.94 fields/s, the animation will run for 2.14
seconds per column (once loaded).
•
If the green traverses all 8 columns, the store is configured 512Mb
or more. At 59.94 fields/s, the animation will run for 17 seconds.
The test loading time is approximately 20 seconds.
Note: Unload the self test animation after completing the test.
Refer to page 89 Store Operations.