Cabling – Grass Valley Concerto Routing Matrix v.1.8.1 User Manual
Page 84
84
Concerto — Installation and Service Manual
Section 2 — Installation
Cabling
contains a compilation of the connectors found on the Concerto
Routing switcher.
contains a compilation of the connectors and
label variations found on the Matrix Module Backplanes. The Gender
column indicates the gender of the connector found on the frame. The
Details column contains information to assist in using the connector.
Table 34. Connectors Found on Concerto Frame
Label
Connector
Details
Type
Gender
AES REF
BNC
Female
Synchronous audio references use unbalanced 75 ohm connector, terminator, and coaxial cable.
Loop-thru cabling supported.
ALARM
D-9 Pin
Female
Audio Alarm use serial/machine cable.
DC PWR
4 and 7 RU frames
8 RU frame
Terminal Block
Barrier Strip
Male
NA
Use 3-conductor 12 AWG (3.31 mm
2
) wire for DC power connection.
E-NET 1 and
E-NET 2
RJ45
Female
Ethernet network communication interface is 10Base-T and 100Base-T compatible use Category
5 cable, 8 conductor twisted pair. All Ethernet connections need to be routed through switches.
EXT-COM1 and
EXT-COM2
D-9 Pin
Female
External Control (factory use) use serial/machine cable.
VIDEO REF 1 and 2
BNC
Female
Video reference use unbalanced 75 ohm connector, terminator, and coaxial cable. Loop-thru
cabling supported.
Table 35. Connectors Found on Module Backplanes
Label
Module
a
Connector
Details
Type
Gender
EXP IN 1 and 2
EXP OUT 1 and 2
AA, DA
BNC
Female
Use unbalanced 75 ohm connector and coaxial cable.
INPUTS
AV, DA, DV
BNC
Female
Use unbalanced 75 ohm connector and coaxial cable.
AA, DA, TC
50 Pin D
Female
Use balanced 110 ohm connector and shielded twisted pair cable.
AA
Terminal
Block
Male
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
)
DA, TC
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
) Use
balanced 110 ohm shielded twisted pair cable.
PT
9 Pin D
Female
Use balanced 110 ohm connector and shielded twisted pair cable
MON IN, MON OUT, and
MONITOR IN and OUT
AA, DA
9 Pin D
Female
Monitor input use balanced 110 ohm connector and shielded twisted pair cable
AV, DA, DV
BNC
Female
Monitor input use an unbalanced 75 ohm connector and coaxial cable.
AA
Terminal
Block
Male
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
)
DA
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
) Use
balanced 110 ohm shielded twisted pair cable.