Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 82)

82 Concerto — Installation and Service Manual
Section 2 — Installation
Module Installation
All the modules are horizontally oriented in the frames, and edge guides
aid insertion and removal. Modules are oriented in the frame with the front
(populated) side facing up. The position of the modules is the same for the
7 RU frame (shown in
Figure 34 ) and the 8 RU Concerto+ frame.
CAUTION It is critical that the modules be oriented correctly to prevent bent pins. It is
very important that the module and the backplane are compatible. If a module
is plugged into an incompatible backplane, it will cause damage.
Figure 34. 7 RU frame configuration
8138_00_05r1
Matrix Modules
Controller Modules
Power Supply Modules
Slot 1
Slot 4
Slot 3
Slot 2
Slot 1
Slot 2
Slot 1
Slot 2