Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 117)

Concerto — Installation and Service Manual 117
Concerto Web Pages
Matrix Controller Factory Defaults
This read-only page shows the factory default settings for the Concerto
system. The
Factory Defaults button on the Network Configuration page is
used to restore these settings (see Figure 59 on page 113 ).
Figure 63. Matrix Controller Factory Defaults Web Page
Note IP addresses set on a Concerto Matrix Controller with the Factory Defaults
button on the Concerto Matrix Network Configuration web page
(192.168.1.134 primary, 192.168.1.135 secondary) are different from the IP
addresses manually set on a Concerto at the factory before shipment.