Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 125)

Concerto — Installation and Service Manual 125
AES Attributes
Figure 72. AES Input Inverts
Invert options assign the invert (opposite logic state) of the signal to an
Input using the settings in
Table 46 .
2. After assigning the Input attributes, click OK to finalize your settings.
Table 46. AES Invert Options
Attribute Definition
0 None Signal is not changed.
1 Channel A Channel A’s audio is inverted.
2 Channel B Channel B’s audio is inverted.
3 Both A & B Channel A and Channel B’s audio is inverted.
Async Asynchronous signals are routed in 7500
matrices. Not supported by Concerto.
CHA CHA
CHB CHB
None
Left Channel
Right Channel
Invert Channel A
CHA CHA
CHB CHB Right Channel
Invert Channels A & B
CHA CHA
CHB CHB
Invert Channel B
CHA CHA
CHB CHB
Left Channel
7103
01
02
r0