Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 141)

Concerto — Installation and Service Manual 141
Signal Specifications
Signal Specifications
The Concerto 3Gb/s board provides a flexible option for your multi-format
switching needs. This board can be configured for operations that are up to
3 Gb/s; it can also be configured to only support SD and HD signals. This
configuration setting must be performed by Grass Valley.
Concerto 3Gb/s Board Part Numbers
The part number will differentiate whether the board can support up to 3
Gb/s operations or if it is only to be used for SD and HD operations. The
Part number is located above and to the left of the barcode (
Figure 79 ).
If the part number is:
• 771-0486-00, the board is configured for up to 3 Gb/s operations.
• 771-0486-50, the board is configured for SD and HD operations only.
Figure 79. 3Gb/s Board Part Number Location
3 Gb/s Digital Video Specifications
For 3 Gb/s signal specifications, see 3 Gb/s Digital Video on page 164
Physical Specifications
The Concerto 3Gb/s board supports 128x128 signaling.
Note All unused BNC connectors on the Concerto 3Gb/s board must be terminated
with 75 ohm terminators for EMC compliance.
071813812_multiRate-Board_part-num
The Location of the
3Gb/s Board’s Part
Number
3Gb/s Board Barcode