Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 123)

Concerto — Installation and Service Manual 123
AES Attributes
Figure 70. AES Output Attributes Dialog
Outputs can be assigned Soft Mute/No Soft Mute individually, in groups, or
by using the associated “all” buttons. The Soft Mute/No Soft Mute attribute
is a soft mute or alignment of one signal’s amplitude to another signal’s
amplitude at switching. Some users call this audio dunking. Soft mute
prevents a crack or pop at switching.
Note The 20/24 Bit attribute is not supported by Concertos controlled by
SMS7000.
2. When you’ve finished assigning Output attributes click Ok to finalize
your settings.
AES Input Attributes
1. Click the Input Attrib Info button to open the AES Input Attributes dialog.