Local configuration example, Figure 77 – Grass Valley Concerto Routing Matrix v.1.8.1 User Manual
Page 136
136
Concerto — Installation and Service Manual
Section 3 — Control System Configuration
Figure 77. Concerto Local Configuration.
The Local Control settings required depend on what Concerto hardware
modules are installed and your specific facility requirements.
Local Configuration Example
The following procedure can be used to configure a Concerto SD video
128x128 matrix for standalone operation using Native Protocol:
Activate Standalone Control
1.
Select the Concerto
Matrix System
web page from the links on the left side
of the main web page.
2.
Under
Control Options
select the
Standalone Control
radio button.
3.
Click the
Save New Settings
button at the bottom of the page.
Locally Configure the Concerto Matrix
1.
From the links on the left side of the main web page select the
Local Configuration
page.