Audio monitor configuration – Grass Valley Concerto Routing Matrix v.1.8.1 User Manual
Page 69
Concerto — Installation and Service Manual
69
Monitor Output Configuration
One Destination signal is available to the last
Monitor Out
BNC connector in
the matrix. The other connectors are used to cable the backplanes together.
For cabling information see
Digital Video Monitoring on page 100
Audio Monitor Configuration
Audio modules use five different backplanes, Analog and AES Digital
modules can be combined in the same matrix, and they use internal bussing
to support monitor functions, so all outputs in the matrix are available. The
Monitor In
connection is not used. One Destination signal is available to all of
the
Monitor Out
connectors in the matrix. All the backplanes have at least one
Monitor Out
connector. Two of the AES Audio backplanes have two
Monitor
Out
connectors. On the AES Terminal Block backplane there is a terminal block
Monitor Out
connector and a BNC
Monitor Out
connector and on the AES 50 pin
D backplane there is a 9 pin D
Monitor Out
connector and a BNC
Monitor Out
connector. In
Total Monitor Outputs
column displays the
Table 30. Digital Video Monitoring Configuration
Matrix
Size
Digital
Video
Type
a
a
The maximum number of HD modules that can be in a Concerto matrix is three and the fourth slot has to remain empty. If
two HD modules are used then the other two slots can be loaded with any of the non HD modules.
Number
of
Modules
Backplane
Output
Range
External
Cable
Looping
Total
Monitor
Outputs
128x128
SD
4
SD BNC
1-128
Yes
1
128x128
SD
3
SD BNC
1-128
Yes
1
HD
1
HD BNC
128x128
SD
2
SD BNC
1-128
Yes
1
HD
2
HD BNC
96x96
SD
3
SD BNC
1-96
Yes
1
96x96
SD
2
SD BNC
1-96
Yes
1
HD
1
HD BNC
96x96
SD
1
SD BNC
1-96
Yes
1
HD
2
HD BNC
64x64
SD
2
SD BNC
1-64
Yes
1
64x64
HD
2
HD BNC
1-64
Yes
1
64x64
SD
1
SD BNC
1-64
Yes
1
HD
1
HD BNC
32x32
SD
1
SD BNC
1-32
No
1
32x32
HD
1
HD BNC
1-32
No
1