Grass Valley Concerto Routing Matrix v.1.8.1 - Manual (Page 122)

122 Concerto — Installation and Service Manual
Section 3 — Control System Configuration
A slice must be created for each signal type.
Figure 69. Managing Slices
AES Attributes
This section contains information for the AES Attributes as they are config-
ured using an SMS7000 GUI. Encore settings are slightly different but the
fundamental principle is the same.
The Output Attrib Info and Input Attrib Info buttons are enabled when there is a
check in the AES Attributes box. Some of these attributes require Concerto-
specific settings.
AES Output Attributes
1. Click the Output Attrib Info button to access the settings for output
attributes. Use this dialog to set the outputs individually or in groups.
Note Asynchronous Output (or input) is not supported by Concerto.